Cheap towing Summary
Towing any vehicle, whether it’s a refrigerated truck, a snack hut or even just a standard trailer, will dramatically affect the way your van handles. If you are not used to towing any kind of trailer, there are a few safety tips you should bear in mind before setting off. Feel free to find more information at cheap towing near me
The first rule is – always read the manual. Even if you are an experienced driver with plenty of practice in towing the manual will give you vital information that will determine how you hitch up the trailer, tyre pressures, the maximum load limit and weight distribution instructions. Refrigerated trailers will also need to be connected up correctly to ensure that all electrical connections are wired up properly and that the unit will not fail in transit.
Commercial van insurance can be invalidated if your policy does not cover you for towing, so it is essential that you check before hitching up your trailer that your van insurance allows you to tow a trailer. This is particularly important if you are towing vehicles such as snack huts, as they may require additional cover to deal with the contents of the hut and whether the hut has propane gas cylinders attached. Some cheap van insurance policies may not cover you for towing trailers over a certain weight, so check your policy carefully before venturing out onto the road.
Once you’ve checked that your insurance is in place and you have also had a good look at the manual, the next step is to ensure that your vehicle is suitable for towing the weight of the trailer and that the trailer itself is hitched up correctly. Any trailer that has its own braking system must by law be fitted with a safety chain. This will prevent the trailer from potentially careering into oncoming traffic should the hitch fail by applying the safety brakes. Ensure that if your trailer does has a safety chain fitted that it is attached correctly to the towing vehicle.
One of the most common causes of incidents involving towed vehicles is incorrect weight distribution of the load. By checking with the manual you will be able to determine the correct weight for the axle configuration and how that weight should be distributed for maximum safety.