Reasons You Shouldn’t Ignore a Roof Leak Details

The first step in determining the source of a roof leak is to look in the attic. And if you already have lighting in the attic, get a decent flashlight. You’ll also need a tape measure with a circumference of at least 25 feet. You may find more details about this at https://canyonstateroofs.com/3-reasons-you-shouldnt-ignore-a-roof-leak/.

Now go up to the attic and look around the place above where the leak is coming through the ceiling. When it’s raining or snowing on the roof, the easiest way to diagnose a roof leak is when it’s raining or snowing. Even if the roof leak has dried up, there will still be some signs of its location.

If it’s pouring, watch for some water coming in and follow the trail before it comes to a halt. Reflect the spotlight off the water with the flashlight. The water should have left a darker stain on the rafters or roof plywood if it wasn’t raining. Trace any water stains as far back as possible to determine where they originated. You should also keep an eye out for daylight coming through the cracks. If you don’t see a water trail, look around each vent pipe and anything else that connects the roof to the outside. Looking at the insulation to see whether it is damp or packed down from being wet is another way to find out where the water is dripping from. This will just show you where the water dripped down from the roof, not where the leak is. Before dripping down to your ceiling, water can move quite a distance down the rafters.

Take out your tape measure now that you’ve found the general area or the exact spot where the roof is leaking. Measure from one end of the attic to the spot where the roof seems to be leaking. Take another measurement from one of the attic’s sides to the roof leak’s location. Make a mental note of these measurements so you don’t forget them when you go up on the roof to fix the leak.

It’s time to climb up on the roof now that you’ve figured out where the roof leak is coming from. Just make sure to go up on the roof when the weather is good. When the roof is wet, it’s simply unsafe and impossible to patch a leak. You’ll need a few basic things before going up on the roof. The first tool you’ll need is a caulk gun and a roofing tar tube. Roofing tar can be found in most home improvement stores in the roofing section. A hammer and a tape measure are also required.