Tips For Decking Waterproofing

Decking Waterproofing is important as there are many types of surfaces on a deck, these will all be affected by moisture. The first and primary step is to stop the moisture being absorbed into the surface, as this will not only damage the surface but will also result in the growth of mould and rot, this can quickly destroy any expensive timber on the deck. A good quality decking waterproofing solution can stop most water from penetrating the surface, allowing the surface to breathe. If you do choose to use rubber decking insulation then the first step in the process is to treat the lumber with an insecticide, this stops the growth of black soot which is produced by the fungus that naturally occurs on the decking. Visit us for great deals in Ideal Sundecks Ltd. – Surrey decking waterproofing
Once the decking has been treated and once it has dried out you will need to apply a wood preservative to prevent the moisture from getting back into the surface. The type of preservative you select should depend upon the climate where you live, a good quality marine preservative will stand up against the salt air in the sea and will not cause any problems. This is an important step in decking waterproofing as if you are using untreated wood then the preservatives you put on the wood will begin to break down over time, if you are not protecting the wood properly then the decking will start to absorb moisture from the air.
The second stage of decking waterproofing involves the use of a high quality waterproof top coat. This is applied to the timber and helps to prevent any further water entering the surface. There are a range of different finishes available for decking. Some of these finishes include paintless rubber, wood grain, natural, clear coating, texture and electrostatic. Some decking can also be made out of composite materials, which can be painted over with any finish of your choice.